Clear Filters | 1061 - 1080 of 6480 results

ROTC Airmen participate in readiness exercise

Cadet Maj. Avery Buggert, a member of the ROTC program at the University of North Dakota, inspects Airmen on Grand Forks Air Force Base, N.D., April 21, 2018. Buggert verified all Airmen had the correct weaponry and equipment to ensure they were prepared for a readiness exercise. (U.S. Air Force photo by Airman 1st Class Melody Wolff)
Details Download

230417-F-JO744-1139

U.S. Army Sergeant Raymond Ruschel, Bravo Battery, 1-188th ADA Regiment Center, North Dakota Army National Guard section sergeant, demonstrates a route of a Combat Lifesaver course exercise using model cars on a map of Grand Forks Air Force Base, North Dakota, April 17, 2023. U.S. service members assigned to the 319th Reconnaissance Wing, North Dakota Army National Guard and U.S. Customs and Border Protection collaborated during a five-day Tactical Combat Casualty Care level 2 course. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

An airman from the 319th Aircraft Maintenance Squadron preforms a quality control check on soft clamps produced by the aircraft metal technology shop on Grand Forks Air Force Base, North Dakota, April 14, 2023. Soft clamps are one of the products manufactured by the metal tech shop to enable varies units across base to accomplish their mission. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

A Computerized Numerical Control mill cuts a piece of metal April 14, 2023, on Grand Forks Air Force Base, North Dakota. The CNC mill is an automated metal working mill that can be programmed with different tools and cutting paths to create different parts in a precise and timely manner. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

An airman from the 319th Aircraft Maintenance Squadron turns a nob on a Computerized Numerical Control mill April 14, 2023, on Grand Forks Air Force Base, North Dakota. The CNC mill is an automated version of the manual mill that can be programed with different tools and cutting paths to help decrease time and manual labor needed in creating products. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

Senior Airmen Kevin Ramos, 319th Aircraft Maintenance Squadron metal technician journeyman, inputs a program into a Computerized Numerical Control mill April 14, 2023, on Grand Forks Air Force Base, North Dakota. The CNC mill increases workflow and minimizes the possibility of error and injury in the metal milling process. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

Airmen assigned to the 319th Aircraft Maintenance Squadron attended a training on a Computerized Numerical Control mill April 14, 2023, at Grand Forks Air Force Base, North Dakota. The four-day long training certified airmen to use the CNC mill, giving them the ability to produce product aircraft parts more accurately and quickly. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

Grand Forks team takes small UAS program to new heights

A drone flies through the air April 7, 2023, at Grand Forks Air Force Base, North Dakota. The 319th Security Forces Squadron recently conducted a test flight to demonstrate their new drone’s capabilities and features.
Details Download

Grand Forks team takes small UAS program to new heights

Col. David Castor, 319th Mission Support Group commander, checks his camera monitor while flying a drone April 7, 2023, on Grand Forks Air Force Base, North Dakota. 319th Reconnaissance Wing leadership recently witnessed the 319th Security Forces Squadron drone surveillance capabilities during a demonstration.
Details Download

Grand Forks team takes small UAS program to new heights

Chad Sherod, 319th Security Forces Squadron lead sUAS instructor, extends his hand to catch a descending drone April 7, 2023, on Grand Forks Air Force Base, North Dakota. The 319th Aircraft Maintenance Squadron plans to implement the use of drones within their disaster recovery team in the event of an aircraft crash or natural disaster.
Details Download

Grand Forks team takes small UAS program to new heights

Chad Sherod, 319th Security Forces Squadron lead sUAS instructor, reaches into his drone case April 7, 2023, on Grand Forks Air Force Base, North Dakota. The 319th Reconnaissance Wing became the first in Air Combat Command to employ the sUAS program with operators spanning across multiple units within the wing.
Details Download

Grand Forks team takes small UAS program to new heights

Unassembled parts of a small unmanned aerial system rest in a protective case April 7, 2023, on Grand Forks Air Force Base, North Dakota. The 319th Security Forces Squadron recently conducted a test flight to demonstrate their new drone’s capabilities and features.
Details Download

F-22

A U.S. Air Force F-22 Raptor assigned to the 71st Fighter Squadron flies over Tyndall Air Force Base, Florida, March 29, 2023. The 71st Fighter Squadron recently took over the 43d FS mission of training F-22 pilots, meaning each F-22 must relocate to Joint Base Langley-Eustis, Virginia. (U.S. Air Force photo by Senior Airman Tiffany Del Oso)
Details Download

16th Air Force commander visits 319th Reconnaissance Wing

U.S. Air Force Lt. Gen. Kevin B. Kennedy, 16th Air Force commander speaks to airmen at the Zero Ground gaming lounge March 29, 2023, on Grand Forks Air Force Base, North Dakota. Lt. Gen. Kennedy prioritized the importance of driving modernization while visiting the 319th Reconnaissance Wing.
Details Download

319th RW officer selected for international fellowship program

Capt. Jamie Leonheart, 319th Reconnaissance Wing director of wing innovation, poses for a photo Mar. 28, 2022, at Grand Forks Air Force Base, North Dakota. Leonheart is one of 10 federal employees selected for the 27th class of the Mike Mansfield Fellowship program. The program was established by Congress in 1994 to build a corps of U.S. Government employees with comprehension of Japanese language, practices, and government.
Details Download

16th Air Force commander visits 319th Reconnaissance Wing

U.S. Air Force Lt. Gen. Kevin B. Kennedy, 16th Air Force commander responds to a question during an interview March 28, 2023, on Grand Forks Air Force Base, North Dakota. Lt. Gen. Kennedy conveys his perspective about the importance of maintaining mission goals and priorities for both the 16th Air Force and the 319th Reconnaissance Wing.
Details Download

16th Air Force commander visits 319th Reconnaissance Wing

U.S. Air Force Lt. Gen. Kevin B. Kennedy, 16th Air Force commander speaks to airmen from the 319th Aircraft Maintenance Squadron March 28, 2023, on Grand Forks Air Force Base, North Dakota. Lt. Gen. Kennedy listened to airmen share their experience of working on aircraft while giving his own perspective as a command pilot who has flown the B-1 and T-38.
Details Download

16th Air Force commander visits 319th Reconnaissance Wing

U.S. Air Force Lt. Gen. Kevin B. Kennedy, 16th Air Force commander, signs a specialized aircraft panel March 28, 2023, on Grand Forks Air Force Base, North Dakota. Lt. Gen. Kennedy had the opportunity to speak with 319th Reconnaissance Wing airmen about the importance of their mission capabilities.
Details Download

16th Air Force commander visits 319th Reconnaissance Wing

U.S. Air Force Lt. Gen. Kevin B. Kennedy, 16th Air Force commander, coins Airman 1st Class Angelia Lamont, 319th Aircraft Maintenance Squadron aircraft maintenance technician March 28, 2023, on Grand Forks Air Force Base, North Dakota. Airman 1st Class Angelia Lamont was recognized for her outstanding performance and abilities at the 319th AMXS.
Details Download

7th Reconnaissance Squadron supports NATO's eastern flank operations

U.S. Air Force Senior Airman Jonathan Flores, 7th Reconnaissance Squadron avionics support, left, and U.S. Air Force Senior Airman Bryan Alvelo, 7th Reconnaissance Squadron avionics launch lead, right, are two of the airmen who work the midnight shift to ensure the U.S. Air Force RQ-4 Global Hawk mission is up and running 24/7 at Naval Air Station Sigonella, Italy. Intelligence, surveillance and reconnaissance airmen and platforms are postured and prepared to provide near real time awareness to combat-capable forces in an effort to deter aggression and defend our allies and partners should deterrence fail. (U.S. Air Force photo by Staff Sgt. Chance Nardone)
Details Download