Clear Filters | 1641 - 1660 of 6166 results

319th Air Base Wing commander focuses on base security

Col. Benjamin Spencer, 319th Air Base Wing commander (right), briefs member of the 319th Security Forces Squadron during guard mount March 28, 2018, on Grand Forks Air Force Base, N.D. He and Chief Master Sgt. Brian Thomas, 319 ABW command chief, used the opportunity to applaud defenders for their dedication and professionalism, and recognized the challenges they face while protecting Airmen and their families. (U.S. Air Force photo by Master Sgt. Amanda Callahan)
Details Download

319th Air Base Wing commander focuses on base security

Col. Benjamin Spencer, 319th Air Base Wing commander (right), briefs member of the 319th Security Forces Squadron during guard mount March 28, 2018, on Grand Forks Air Force Base, N.D. He and Chief Master Sgt. Brian Thomas, 319 ABW command chief, used the opportunity to applaud defenders for their dedication and professionalism, and recognized the challenges they face while protecting Airmen and their families. (U.S. Air Force photo by Master Sgt. Amanda Callahan)
Details Download

319th Air Base Wing commander focuses on base security

Col. Benjamin L. Spencer, 319th Air Base Wing commander (right), points to an area near the main gate to verify a location to be improved by scheduled construction March 28, 2018, at Grand Forks Air Force Base, N.D. The commander, along with the 319 ABW command chief, Chief Master Sgt. Brian Thomas (left), Terry Rutan, 319th Security Forces Squadron operations officer, and other subject matter experts surveyed security elements designed to prevent unauthorized entry to the installation. Construction on both installation gates is scheduled to start in April 2018 and includes many security upgrades. (U.S. Air Force photo by Master Sgt. Amanda Callahan)
Details Download

319th Air Base Wing commander focuses on base security

Jason Perkins, 319th Security Forces Squadron anti-terrorism program manager (left), reviews security upgrade information with 319th Air Base Wing leaders March 28, 2018, on Grand Forks Air Force Base, N.D. Recent unauthorized entries at other bases, put commanders on notice to conduct thorough reviews of installation security procedures and potential shortfalls in base protection. “I’m confident in our defenders and our security protocols, but there’s always room to improve. This provided me the opportunity to take a close look at how I can better equip base defenders to perform their vital mission,” said Spencer. (U.S. Air Force photo by Master Sgt. Amanda Callahan)
Details Download

GFAFB Honor Guard

GFAFB Honor Guard
Details Download

GFAFB HONOR GUARD

GFAFB HONOR GUARD
Details Download

319th Security Forces Squadron Airmen endure sub-freezing temperatures to protect GFAFB

Airman 1st Class Brandon Hilliard, installation entry controller with the 319th Security Forces Squadron, left, and Senior Airman Dakota Smith, base defense operations center operator with the 319 SFS, interact with a driver passing through the main gate of Grand Forks Air Force Base, N.D., March 7, 2018. Installation entry controllers spend an average of 12 hours on each shift, staying vigilant and ensuring no one enters the base without authorization. (U.S. Air Force Photo by Airman 1st Class Elora J. Martinez)
Details Download

319th Security Forces Squadron Airmen endure sub-freezing temperatures to protect GFAFB

Airman 1st Class Brandon Hilliard, installation entry controller with the 319th Security Forces Squadron, conducts a radio check prior to finishing his shift March 7, 2018 at Grand Forks Air Force Base, N.D. Hilliard has been an installation entry controller and says his favorite part of the job is being able to interact with several people per day. (U.S. Air Force Photo by Airman 1st Class Elora J. Martinez)
Details Download

180213-F-VG991-1031

U.S. Air Force Airman 1st Class Andrew Villagran, a 319th Civil Engineer Squadron emergency management journeyman, briefs Airmen during readiness training on Grand Forks Air Force Base, N.D., Feb. 26, 2018. Villagran spoke about post attack reconnaissance actions and how to check equipment for contamination after a potential chemical attack. (U.S. Air Force photo by Airman 1st Class Melody Wolff)
Details Download

180213-F-VG991-1042

(Holding microphone), U.S. Air Force Col. Benjamin W. Spencer, 319th Air Base Wing commander, addresses Airmen Feb. 28, 2018, on Grand Forks Air Force Base, N.D. Spencer stressed the importance of readiness in today’s operating environment, and spoke about what the exercise entailed for the Airmen. (U.S. Air Force photo by Airman 1st Class Melody Wolff)
Details Download

180213-F-VG991-1050

Airmen prepare for a readiness training and exercise on Grand Forks Air Force Base, N.D., Feb. 28, 2018. The exercise tested Airmen through simulated scenarios requiring them to work together in a simulated contested environment to determine solutions. (U.S. Air Force photo by Airman 1st Class Melody Wolff)
Details Download

180213-F-VG991-1084

U.S. Air Force Senior Airman Isabella Rico, a 319th Operations Support air traffic controller, talks through a hand-held radio on Grand Forks Air Force Base, N.D., Feb. 28, 2018. Rico communicated to Airmen in the other tents to ensure they were following protocol during the exercise. (U.S. Air Force photo by Airman 1st Class Melody Wolff)
Details Download

180213-F-VG991-1125

Airmen participate in a readiness exercise on Grand Forks Air Force Base, N.D., Feb. 28, 2018. The exercise tested the Airmen’s abilities to survive and operate in many situations, to include a simulated chemical environment. (U.S. Air Force photo by Airman 1st Class Melody Wolff)
Details Download

180213-F-VG991-1132

Airmen apply self aid and buddy care for a simulated broken arm during a readiness exercise on Grand Forks Air Force Base, N.D., Feb. 28, 2018. During the week-long exercise, Airmen accessed their knowledge on how to properly act and respond to a variety of simulated situations. (U.S. Air Force photo by Airman 1st Class Melody Wolff)
Details Download

180313-F-VG991-1001

Airman 1st Class Maxwell Ali, an aerospace technician for the 319th Medical Operations Support Squadron, poses for a portrait on Grand Forks Air Force Base, N.D., March. 13, 2018. Ali was born and raised in Ghana, a country in West Africa. (U.S. Air Force photo by Airman 1st Class Melody Wolff)
Details Download

180213-F-AA000-1001

(Wearing glasses) Airman 1st Class Maxwell Ali, an aerospace technician for the 319th Medical Operations Support Squadron, assists with a cesarean section at Bukovinian State Medical University in Chernivsti, Ukraine Sept. 14, 2014. Ali was in the middle of his internship in medical school. (Courtesy photo)
Details Download

Indian C-130 Hercules transits through GFAFB

An Indian Air Force C-130 Hercules sits on the flight line Jan. 13, 2018, at Grand Forks Air Force Base, N.D. before heading to McChord AFB, Wash. for exercise Vajra Prahar. (U.S. Air Force photo by Airman 1st Class Elora J. Martinez)
Details Download

Indian C-130 Hercules transits through GFAFB

An Indian Air Force crew member manually rotates the propellers of a C-130 Hercules Jan. 13, 2018, after landing at Grand Forks Air Force Base, N.D. before heading to McChord AFB, Wash. for exercise Vajra Prahar. (U.S. Air Force photo by Airman 1st Class Elora J. Martinez)
Details Download

Indian C-130 Hercules transits through GFAFB

An Indian Air Force C-130 Hercules sits on the flight line Jan. 13, 2018 at Grand Forks Air Force Base, N.D., before heading to McChord AFB, Wash. for exercise Vajra Prahar. (U.S. Air Force photo by Airman 1st Class Elora J. Martinez)
Details Download

Indian C-130 Hercules transits through GFAFB

An Indian Air Force crewmember talks with a 319th Security Forces Squadron Airman on the flight line Jan. 13, 2018, at Grand Forks Air Force Base, N.D. (U.S. Air Force photo by Airman 1st Class Elora J. Martinez)
Details Download