Clear Filters | 1041 - 1060 of 6407 results

Grand Forks team takes small UAS program to new heights

Unassembled parts of a small unmanned aerial system rest in a protective case April 7, 2023, on Grand Forks Air Force Base, North Dakota. The 319th Security Forces Squadron recently conducted a test flight to demonstrate their new drone’s capabilities and features.
Details Download

319th LRS virtual resiliency training

Airmen from the 319th Logistics Readiness Squadron provide feedback following a session with the Emotional Intelligence Institute’s avatar during a non-commissioned officers training day April 28, 2023, at Grand Forks Air Force Base, North Dakota. The avatar allowed leaders and frontline supervisors to practice having difficult discussions in a simulated environment, preparing them to handle unexpected and potentially emergent situations in the future. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th LRS virtual resiliency training

U.S. Air Force Staff Sgt. Liliana Hernandez, 319th Logistics Readiness Squadron vehicle maintenance technician, participates in a non-commissioned officers training day April 28, 2023, at Grand Forks Air Force Base, North Dakota. The training involved using avatar technology from the Emotional Intelligence Institute to produce an innovative, virtual safe space experience for empathetic communication and leadership training. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th LRS virtual resiliency training

Airmen from the 319th Logistics Readiness Squadron participate in a non-commissioned officers training day April 28, 2023, at Grand Forks Air Force Base, North Dakota. NCOs within the 319th LRS completed an avatar-based training from the Emotional Intelligence Institute to practice and apply soft skill behaviors in a variety of simulated, military-based scenarios. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

230418-F-JO744-2593

Service members assigned to the 319th Reconnaissance Wing; Bravo Battery, 1st 188th Air Defense Artillery Regiment, North Dakota Army National Guard and U.S. Customs and Border Protection participate in a Combat Lifesaver course on Grand Forks Air Force Base, North Dakota, April 18, 2023. Certified CLS trainers from the 319th Medical Group evaluated the students’ medical treatments of the mock injuries to ensure they were proficient. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

230418-F-JO744-2529

U.S. Airmen and U.S. Soldiers carry a mannequin on a stretcher during a Combat Lifesaver course on Grand Forks Air Force Base, North Dakota, April 18, 2023. Service members used learned CLS techniques to properly assess, treat and transport victims in a simulated emergency. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

230418-F-JO744-2323

A U.S. service member inserts a nasopharyngeal airway into a mannequin on Grand Forks Air Force Base, North Dakota, April 18, 2023. U.S. service members assigned to the 319th Reconnaissance Wing, North Dakota Army National Guard and U.S. Customs and Border Protection collaborated during a five-day Tactical Combat Casualty Care level 2 course. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

230418-F-JO744-2214

A U.S. Soldier assigned to the Bravo Battery, 1-188th Air Defense Artillery Regiment, North Dakota Army National Guard, assesses a mannequin during a Combat Lifesaver course on Grand Forks Air Force Base, North Dakota, April 18, 2023. U.S. Soldiers from the North Dakota Army National Guard joined U.S. Airmen from the 319th Security Forces Squadron and 319th Medical Group and a member of the U.S. Customs and Border Protection to train in a Joint Force and interagency environment. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

230418-F-JO744-2191

U.S. Airmen assigned to the 319th Medical Group enter the 319th Security Forces training facility during a Combat Lifesaver training course on Grand Forks Air Force Base, North Dakota, April 18, 2023. The 319th SFS facilitated simulated scenarios for 319th MDG personnel, soldiers from the Bravo Battery, 1-188th ADA Regiment, North Dakota Army National Guard and a member from the U.S. Customs and Border Protection. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

230418-F-JO744-1827

U.S. Air Force Staff Sergeant Jeremy Louis, 319th Security Forces Squadron patrolman, enters the 319th SFS training facility in a ready position during a Combat Lifesaver course on Grand Forks Air Force Base, North Dakota, April 18, 2023. The course included a simulated raid of a building where 319th SFS members were tasked with saving victims of a catastrophe while capturing a suspect. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

230417-F-JO744-1139

U.S. Army Sergeant Raymond Ruschel, Bravo Battery, 1-188th ADA Regiment Center, North Dakota Army National Guard section sergeant, demonstrates a route of a Combat Lifesaver course exercise using model cars on a map of Grand Forks Air Force Base, North Dakota, April 17, 2023. U.S. service members assigned to the 319th Reconnaissance Wing, North Dakota Army National Guard and U.S. Customs and Border Protection collaborated during a five-day Tactical Combat Casualty Care level 2 course. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

First E11-A BACN arrives at Robins

An E-11A BACN, Battlefield Airborne Communications Node, arrived on April 24, 2023, at Robins Air Force Base, Georgia. The arrival of the first BACN, often pronounced bacon, established one of the four new mission sets coming to Robins AFB, and falls under the newly activated 18th Airborne Command and Control Squadron. It is a communications relay and gateway system that provides military commanders with a versatile means of exchanging information from multiple air, ground and maritime sources. (U.S. Air Force photo by Joseph Mather)
Details Download

First E11-A BACN arrives at Robins

An E-11A BACN, Battlefield Airborne Communications Node, arrived on April 24, 2023, at Robins Air Force Base, Georgia. The arrival of the first BACN, often pronounced bacon, established one of the four new mission sets coming to Robins AFB, and falls under the newly activated 18th Airborne Command and Control Squadron. It is a communications relay and gateway system that provides military commanders with a versatile means of exchanging information from multiple air, ground and maritime sources. (U.S. Air Force photo by C Arce)
Details Download

First E11-A BACN arrives at Robins

An E-11A BACN, Battlefield Airborne Communications Node, arrived on April 24, 2023, at Robins Air Force Base, Georgia. The arrival of the first BACN, often pronounced bacon, established one of the four new mission sets coming to Robins AFB, and falls under the newly activated 18th Airborne Command and Control Squadron. It is a communications relay and gateway system that provides military commanders with a versatile means of exchanging information from multiple air, ground and maritime sources. (U.S. Air Force photo by C Arce)
Details Download

First E11-A BACN arrives at Robins

An E-11A BACN, Battlefield Airborne Communications Node, arrived on April 24, 2023, at Robins Air Force Base, Georgia. The arrival of the first BACN, often pronounced bacon, established one of the four new mission sets coming to Robins AFB, and falls under the newly activated 18th Airborne Command and Control Squadron. It is a communications relay and gateway system that provides military commanders with a versatile means of exchanging information from multiple air, ground and maritime sources. (U.S. Air Force photo by C Arce)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

An airman from the 319th Aircraft Maintenance Squadron preforms a quality control check on soft clamps produced by the aircraft metal technology shop on Grand Forks Air Force Base, North Dakota, April 14, 2023. Soft clamps are one of the products manufactured by the metal tech shop to enable varies units across base to accomplish their mission. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

A Computerized Numerical Control mill cuts a piece of metal April 14, 2023, on Grand Forks Air Force Base, North Dakota. The CNC mill is an automated metal working mill that can be programmed with different tools and cutting paths to create different parts in a precise and timely manner. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

An airman from the 319th Aircraft Maintenance Squadron turns a nob on a Computerized Numerical Control mill April 14, 2023, on Grand Forks Air Force Base, North Dakota. The CNC mill is an automated version of the manual mill that can be programed with different tools and cutting paths to help decrease time and manual labor needed in creating products. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

Senior Airmen Kevin Ramos, 319th Aircraft Maintenance Squadron metal technician journeyman, inputs a program into a Computerized Numerical Control mill April 14, 2023, on Grand Forks Air Force Base, North Dakota. The CNC mill increases workflow and minimizes the possibility of error and injury in the metal milling process. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

Airmen assigned to the 319th Aircraft Maintenance Squadron attended a training on a Computerized Numerical Control mill April 14, 2023, at Grand Forks Air Force Base, North Dakota. The four-day long training certified airmen to use the CNC mill, giving them the ability to produce product aircraft parts more accurately and quickly. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download