Clear Filters | 761 - 780 of 6121 results

230418-F-JO744-2529

U.S. Airmen and U.S. Soldiers carry a mannequin on a stretcher during a Combat Lifesaver course on Grand Forks Air Force Base, North Dakota, April 18, 2023. Service members used learned CLS techniques to properly assess, treat and transport victims in a simulated emergency. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

230418-F-JO744-2323

A U.S. service member inserts a nasopharyngeal airway into a mannequin on Grand Forks Air Force Base, North Dakota, April 18, 2023. U.S. service members assigned to the 319th Reconnaissance Wing, North Dakota Army National Guard and U.S. Customs and Border Protection collaborated during a five-day Tactical Combat Casualty Care level 2 course. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

230418-F-JO744-2214

A U.S. Soldier assigned to the Bravo Battery, 1-188th Air Defense Artillery Regiment, North Dakota Army National Guard, assesses a mannequin during a Combat Lifesaver course on Grand Forks Air Force Base, North Dakota, April 18, 2023. U.S. Soldiers from the North Dakota Army National Guard joined U.S. Airmen from the 319th Security Forces Squadron and 319th Medical Group and a member of the U.S. Customs and Border Protection to train in a Joint Force and interagency environment. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

230418-F-JO744-2191

U.S. Airmen assigned to the 319th Medical Group enter the 319th Security Forces training facility during a Combat Lifesaver training course on Grand Forks Air Force Base, North Dakota, April 18, 2023. The 319th SFS facilitated simulated scenarios for 319th MDG personnel, soldiers from the Bravo Battery, 1-188th ADA Regiment, North Dakota Army National Guard and a member from the U.S. Customs and Border Protection. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

230418-F-JO744-1827

U.S. Air Force Staff Sergeant Jeremy Louis, 319th Security Forces Squadron patrolman, enters the 319th SFS training facility in a ready position during a Combat Lifesaver course on Grand Forks Air Force Base, North Dakota, April 18, 2023. The course included a simulated raid of a building where 319th SFS members were tasked with saving victims of a catastrophe while capturing a suspect. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

230417-F-JO744-1139

U.S. Army Sergeant Raymond Ruschel, Bravo Battery, 1-188th ADA Regiment Center, North Dakota Army National Guard section sergeant, demonstrates a route of a Combat Lifesaver course exercise using model cars on a map of Grand Forks Air Force Base, North Dakota, April 17, 2023. U.S. service members assigned to the 319th Reconnaissance Wing, North Dakota Army National Guard and U.S. Customs and Border Protection collaborated during a five-day Tactical Combat Casualty Care level 2 course. (U.S. Air Force photo by Airman 1st Class Raisa Christie)
Details Download

First E11-A BACN arrives at Robins

An E-11A BACN, Battlefield Airborne Communications Node, arrived on April 24, 2023, at Robins Air Force Base, Georgia. The arrival of the first BACN, often pronounced bacon, established one of the four new mission sets coming to Robins AFB, and falls under the newly activated 18th Airborne Command and Control Squadron. It is a communications relay and gateway system that provides military commanders with a versatile means of exchanging information from multiple air, ground and maritime sources. (U.S. Air Force photo by Joseph Mather)
Details Download

First E11-A BACN arrives at Robins

An E-11A BACN, Battlefield Airborne Communications Node, arrived on April 24, 2023, at Robins Air Force Base, Georgia. The arrival of the first BACN, often pronounced bacon, established one of the four new mission sets coming to Robins AFB, and falls under the newly activated 18th Airborne Command and Control Squadron. It is a communications relay and gateway system that provides military commanders with a versatile means of exchanging information from multiple air, ground and maritime sources. (U.S. Air Force photo by C Arce)
Details Download

First E11-A BACN arrives at Robins

An E-11A BACN, Battlefield Airborne Communications Node, arrived on April 24, 2023, at Robins Air Force Base, Georgia. The arrival of the first BACN, often pronounced bacon, established one of the four new mission sets coming to Robins AFB, and falls under the newly activated 18th Airborne Command and Control Squadron. It is a communications relay and gateway system that provides military commanders with a versatile means of exchanging information from multiple air, ground and maritime sources. (U.S. Air Force photo by C Arce)
Details Download

First E11-A BACN arrives at Robins

An E-11A BACN, Battlefield Airborne Communications Node, arrived on April 24, 2023, at Robins Air Force Base, Georgia. The arrival of the first BACN, often pronounced bacon, established one of the four new mission sets coming to Robins AFB, and falls under the newly activated 18th Airborne Command and Control Squadron. It is a communications relay and gateway system that provides military commanders with a versatile means of exchanging information from multiple air, ground and maritime sources. (U.S. Air Force photo by C Arce)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

An airman from the 319th Aircraft Maintenance Squadron preforms a quality control check on soft clamps produced by the aircraft metal technology shop on Grand Forks Air Force Base, North Dakota, April 14, 2023. Soft clamps are one of the products manufactured by the metal tech shop to enable varies units across base to accomplish their mission. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

A Computerized Numerical Control mill cuts a piece of metal April 14, 2023, on Grand Forks Air Force Base, North Dakota. The CNC mill is an automated metal working mill that can be programmed with different tools and cutting paths to create different parts in a precise and timely manner. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

An airman from the 319th Aircraft Maintenance Squadron turns a nob on a Computerized Numerical Control mill April 14, 2023, on Grand Forks Air Force Base, North Dakota. The CNC mill is an automated version of the manual mill that can be programed with different tools and cutting paths to help decrease time and manual labor needed in creating products. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

Senior Airmen Kevin Ramos, 319th Aircraft Maintenance Squadron metal technician journeyman, inputs a program into a Computerized Numerical Control mill April 14, 2023, on Grand Forks Air Force Base, North Dakota. The CNC mill increases workflow and minimizes the possibility of error and injury in the metal milling process. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th AMXS automated milling process cuts time, improves accuracy

Airmen assigned to the 319th Aircraft Maintenance Squadron attended a training on a Computerized Numerical Control mill April 14, 2023, at Grand Forks Air Force Base, North Dakota. The four-day long training certified airmen to use the CNC mill, giving them the ability to produce product aircraft parts more accurately and quickly. (U.S. Air Force photo by Senior Airman Roxanne Belovarac)
Details Download

319th RW officer selected for international fellowship program

Capt. Jamie Leonheart, 319th Reconnaissance Wing director of wing innovation, poses for a photo Mar. 28, 2022, at Grand Forks Air Force Base, North Dakota. Leonheart is one of 10 federal employees selected for the 27th class of the Mike Mansfield Fellowship program. The program was established by Congress in 1994 to build a corps of U.S. Government employees with comprehension of Japanese language, practices, and government.
Details Download

16th Air Force commander visits 319th Reconnaissance Wing

U.S. Air Force Lt. Gen. Kevin B. Kennedy, 16th Air Force commander speaks to airmen at the Zero Ground gaming lounge March 29, 2023, on Grand Forks Air Force Base, North Dakota. Lt. Gen. Kennedy prioritized the importance of driving modernization while visiting the 319th Reconnaissance Wing.
Details Download

16th Air Force commander visits 319th Reconnaissance Wing

U.S. Air Force Lt. Gen. Kevin B. Kennedy, 16th Air Force commander responds to a question during an interview March 28, 2023, on Grand Forks Air Force Base, North Dakota. Lt. Gen. Kennedy conveys his perspective about the importance of maintaining mission goals and priorities for both the 16th Air Force and the 319th Reconnaissance Wing.
Details Download

16th Air Force commander visits 319th Reconnaissance Wing

U.S. Air Force Lt. Gen. Kevin B. Kennedy, 16th Air Force commander speaks to airmen from the 319th Aircraft Maintenance Squadron March 28, 2023, on Grand Forks Air Force Base, North Dakota. Lt. Gen. Kennedy listened to airmen share their experience of working on aircraft while giving his own perspective as a command pilot who has flown the B-1 and T-38.
Details Download

16th Air Force commander visits 319th Reconnaissance Wing

U.S. Air Force Lt. Gen. Kevin B. Kennedy, 16th Air Force commander, signs a specialized aircraft panel March 28, 2023, on Grand Forks Air Force Base, North Dakota. Lt. Gen. Kennedy had the opportunity to speak with 319th Reconnaissance Wing airmen about the importance of their mission capabilities.
Details Download